[FN136]Vectric Aspire 4.5 With Şifre (Updated!)
====================================================
No CRC ERRORS [RAR - 172.43MB + 10% recovery.]
====================================================

WORKING & TESTED on Windows 8.1, Windows Se7en, Windows XP.






Aspire 4.5 has a number of enhancements in all areas of the software along with some completely new functionality. On this page you can read a brief summary of the additions and download the "What's New" PDF document which lists all the new features in detail. We have categorized the changes into four headings, Drawing Tools, Modeling Tools, Toolpath Options and Miscellaneous.

 What's New in Aspire 4.5 PDF Document:
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

Drawing Tools

There are lots very helpful additions to the drawing tools which provide more control over vector creation and improved efficiency when laying out a design, these are:

¤ Rotate objects around a user defined center point.
¤ This can also be used when copying objects in a circular array.
¤ Fixed nudge distance when hold Ctrl + Shift + Arrow Key (defined in Snap Settings - F4).
¤ Ability to move a vector node by a relative distance to its current location.
¤ Snap to center, corner and border mid-points of the job area.
¤ Create vector boundary from multiple overlapping vectors.
¤ Generates a new vector based on the silhouette of selected vectors.

Modeling Tools

The Import 3D model function in Aspire has some new options. The SKP (SketchUp) file-type can now be imported as a 3D component (this will create a single object). There is also an option to add the effect of perspective to 3D models when importing them. For some shapes this will help enhance their appearance and provide more impact when converting them to a component in Aspire.
The Emboss Tool is a completely new feature in Aspire that can be used to great effect when working with some imported 3D models. Often a 3D shape which has not been created in a "relief" style may have too much detail to use it effectively in a job. When the height is reduced on this type of model then much of the detail can be washed out. The Emboss tool provides a way to preserve surface detail when reducing height.

Toolpath Options

Creating a pocket toolpath on slots or "donut" type pockets which are the same width as the tool would often cause undesirable results in previous versions of the software. This has now been updated to automatically recognize this situation and whenever possible try to machine these parts in a single pass making a more efficient toolpath with a better finish.

The Drilling toolpath has had two options added to it. First you can now specify that the Peck-Drilling raises up a distance above the last pass rather than pulling out of the hole completely. This speeds up some types of drilling operation. There is also the option to create a Dwell at the bottom of each pass. This pauses the movement of the tool at the bottom of each "peck" before retracing by the specified number of seconds. To use this feature your CNC must support this option and you will need to ensure your postprocessor has a section to manage this.

    Option to create "rubber band" border and specify an offset distance.

A major enhancement for SketchUp users is a new import tool which can help extract and organize 2D data from a file with an SKP extension (there is also a way to extract 3D data which is detailed below). A SketchUp file is typically drawn as a full 3D object, for example a cupboard or piece of furniture, the new import tool provides many options to control how the data is imported to help dramatically reduce the time it can take to layout this type of data and get it ready to toolpath. This is explained more fully in the "What's New" PDF.


4.5.1.0 Installer/Update+Patch+German Update
OTHERs
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

SAFELINKING
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

Patch built for future updates (works with 4.5.x.x)
OTHERs
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

SAFELINKING
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

Aspire 4.0 DISCS
Disk1:
OTHERs
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

SAFELINKING
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

Disk2:
OTHERs
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.

SAFELINKING
WeBCaNaVaRi'na Üye Olmadan Link'leri ve Kod'ları Göremezsiniz.
Link'leri Görebilmek İçin. Üye Ol. veya Giriş Yap.